MJoy is the project for building DIY controller for joysticks that connect to USB port of your PC. This controller is the electronic brain of USB joysticks. You may choose to build your own joystick hardware or may want to change the electronics of your existing joystick....Go

The Digibox Interface was created to interpret Satellite Control Infra Red codes from a VCR flying lead or window type Infra Red transmitter and convert these to the format used by the Sky Digibox Digital Satellite Receiver. Not all VCR systems have a Satellite control facility, some popular brands that may incorporate this facility include Mitsubishi, Toshiba, Panasonic, Hitachi & Sony.all the RC circuits have been created in Protel 99SE soft AVR AT90S1200A IR:TSOP1863...Go

I.R.BOT contains all information about robot.you can find some interesting stuff about AVR MCU(AT90s8515),IR(infrared control,remote control),DC Servo....Go

The robot uses IR sensors to sense the line, an array of 8 IR LEDs (Tx) and sensors (Rx), facing the ground has been used in this setup. The output of the sensors is an analog signal which depends on the amount of light reflected back, this analog signal is given to the comparator to produce 0s and 1s which are then fed to the µC....Go

...Go

...Go

Laser video projector...Go

The Web Tiger board is a top module designed to fit on a STK 500 developing board from Atmel Corporation. With this board the STK500 is extended with a ATMEGA128 and a Ethernet Interface. This user guide acts as a complete technical hardware reference for advanced users....Go

Egnite's "Ethernut" is a tiny, low-cost Ethernet board for attaching custom hardware directly to a network. It is a full Internet node build on a standard, half-sized Euroboard.also,Ethernut is an Open Source Hardware and Software Project for building tiny Embedded Ethernet Devices....Go

This site is dedicated to my AVR microcontroller projects. Here you will find schematics and board-layouts , also the program-code, part-lists and pictures of the projects. Some projects are programmed in assembler with the AVR Studio compiler and others are programmed with the BASCOM-AVR compiler. Both programming software can be download for free. You can see the projects on the left. Click on the button to go to the specific project....Go

This project is about developing a library for USB functions for the AT43USB3XX family of devices; starting first with the '355. libat43usb is in the very early stages. I am just getting my prototype hardware, the AvrUpod, soldered together. libat43usb will be targeted toward the '355 at first, but I hope that others will contribute code for the '32X and '38X series processors....Go

some AVR mcu projects. * avr-libc: AVR C Runtime Library * avrdude: AVR Downloader/UploaDEr * avrusb: AVR USB * freeice: Free AVR ICE / GDB-Serializer * simulavr: an AVR simulator * uisp: AVR In-System Programmer...Go

On this site, you will find many circuits based on AVR microcontrollers from Atmel. I will increase the number of the circuits, because the microcontrollers, are used in a lot of applications. Cool...Go

there are some AVR projects...Go

Still left to write something about it... Code is available in the download section...Go