Can Bus:Can Bus:Controller Area Network (CAN) is a multicast shared serial bus standard, originally developed in the 1980s by Robert Bosch GmbH, for connecting electronic control units (ECUs).
Fieldbus Foundation
...Go
CAN bus analyser with PIC18F458
A CANalyser is a tool dedicated to the capture or generation of CAN frames. This system is made up of a board inserted in a computer and a software....Go
CAN & UART based Bootloader for AT90CAN32, AT90CAN64, & AT90CAN128
This document describes the UART & CAN bootloader functionality as well as the serial protocols to efficiently perform operations on the on chip Flash & EEPROM memories. This bootloader example will help you develop your own bootloader with custom security levels adapted to your own applications....Go
Sensor-based Control of Three Phase Brushless DC Motors Using AT90CAN128/64/32
his application note describes the control of a BLDC motor with Hall effect position sensors. The implementation includes both direction and open loop speed control....Go
Design Considerations for CAN Bus and Asynchronous Serial
This application note gives guidance on system CPU crystal selection for DS80C400 and DS80C390 microcontrollers when using asynchronous serial and CAN....Go
CAN Bus Interface Description CANbus Pin Out, and Signal Names. Controller Area Network
The Controller Area Network (CAN) specification defines the Data Link Layer, ISO 11898 defines the Physical Layer.
The CAN bus [CANbus] is a Balanced (differential) 2-wire interface running over either a Shielded Twisted Pair (STP), Un-shielded Twisted Pair (UTP), or Ribbon cable. Each node uses a Male 9-pin D connector. The Bit Encoding used is: Non Return to Zero (NRZ) encoding (with bit-stuffing) for data communication on a differential two wire bus. The use of NRZ encoding ensures compact messages with a minimum number of transitions and high resilience to external disturbance....Go
grifo¨ COM - Embedded Controls
They provide Embedded Controls for 8051 MCU,AVR MCU and CAN interface kits....Go
8-bit AVR Microcontroller with 32K Bytes of ISP Flash and CAN Controller
8-bit AVR Microcontroller with 32K Bytes of ISP Flash and CAN Controller. V2.0A and V2.0B standard compliant, the CAN controller handles independent message objects programmable on-the-fly. Perfectly suited for Industrial applications, the microcontroller support CANopen, DeviceNet™ and OSEK™ implementation....Go
CAN-based Microcontrollers
The following devices have on-chip CAN controllers....Go
esd electronic system design:
provides CAN, CANopen, DeviceNet, CompactPCI, PMC, PCI, USB, VMEbus, VME, CANscope, VxWorks, QNX, Linux:...Go
EMICROS: Embedded Micro
an RS232 Serial Interface to Controller Area Network (CAN) adapter. Powered by the MicroChip PIC16F876.The I2C232 RS232 to I2C adapter from Emicros provides a powerful, low-cost solution to interface to an I2C bus...Go
Pic based SBC boards with ethernet, RS232, RS485, CAN, prototype board
We specialize in modular microcontroller based hardware and software solutions - specially for the PIC microcontroller from Microchip....Go
CAN source for Atmel AVR and SJA1000 CAN controller
Still left to write something about it... Code is available in the download section...Go
CAN Remote Automation and Control with the AVR
CARACA is a home automation project based on a net of interconnected programmable circuits suited to perform different tasks like switch on/off appliances, decode commands from Ir remote control units, control thermostats, measure temperature and more. Every node of the net communicate each other through a robust protocol (CANBus), and the status can be monitored by a PC possibly connected to the Internet....Go
Pages: