Do It Yourself electronic drum controller This page is about electronic drums. Here you will find detailed information on how to build an electronic Trigger to MIDI Converter module, based on PIC Microcontroller, and how to build the triggers. This project has been developed for many years now, and it is constantly improving. You can expect professional results form your eDrum module. Let's start with the......Go

SerReg is a small home controller intended to turn your personal computer ( PC ) into a process control / data collection system. With the appropriate sensors SerReg can monitor physical variables such as pressure, temperature, light intensity, weight, movement etc,...Go

...Go

• The RC5 decoder An example of the RC5 decoder with the PIC-01 Development Board.
• The LCD C Driver An example of the modification of the CCS C Compiler's LCD driver for use with
• the PIC-01 Development Board. The custom chars Custom characters on the PIC-01 Development Board's LCD.
• The DS18B20 thermometer An example of the digtal thermometer application on the PIC-01 Development Board
• The DS1302 RTC The Real Time Clock applicatation.
• The PIC16F877A's ADC A programming example of the use of the on-board
• PIC16F877A Analog to Digital Converter.
• The Timer 1 RTC The timer_1 based Real Time Clock application.

...Go

The circuit here described is a simple 4x5 keypad that can be used in particular with the PIC 16F877 microcontroller, for which it has been designed considering a supply of 5V, 16F877 I/O pins leakage current, the voltage level recognized as a high or low state while in TTL or ST mode, etc....Go

PIC16F84 Based Morse Code Reader.Circuits ,schematics and source code are provided.You can DIY it....Go

The Super probe project was designed to see how much could be done with a PIC chip and just a few parts. The image at the right shows the capacitance measuring mode. This device is designed around a PIC16F870, a 4 digit LED display module and very little else.
...Go

PIC Programming with USB -- Chuck's Robotics...Go

PIC16F84A and LEDs ,PIC16F84A and RS232,PIC16F876 and LEDs,PIC16F876 and RS232, 50 Mhz Frequency Meter With PIC16F84....Go

using the PIC16C745 microprocessor with USB...Go

A CANalyser is a tool dedicated to the capture or generation of CAN frames. This system is made up of a board inserted in a computer and a software....Go

Dual-speed PLL designed for wideband FM transmitter....Go

PIC mcu based excellent DIY project.A lot of sensors are applied in this project,such as DS18S20 temperature sensors,MS5534A,pressure and temperature sensor MS5534A....Go

Freddo's PIC projects and Transmitters resources....Go

Good PIC project,all the DIY stuff are offered....Go